Very suitable for repairing small damages. Dries quickly, suitable for sanding, spreads evenly. Can be used as a thick coating. Excellent corrosion protection.
Can be added to a wet surface (no intermediate sanding). For general use for filling uncoated and galvanized steel sheet, cleaned and sanded UP package and old paint surfaces. The surface must be clean, dry and grease-free. Lightly sand problem surfaces before use. Shake the jar vigorously for at least 2 minutes before removing the button. Remove the (red) button on the cap, insert it into the pin on the bottom of the jar and push the pin all the way in as far as it will go (press to activate). Remove the button and discard it. Shake the can vigorously before spraying and between each spray coat for at least 2 minutes. Spray the substance in 2-3 layers (70 µm) from a distance of 20-30 cm. Note the intermediate drying time (10-15 minutes). Can be painted over with all common, commercially available coatings. Processing/working time: Max. 24 hours. Drying time: Air drying: 60 minutes / 20 °C Infrared drying: 10 minutes / 60 °C Adherence to the drying times is absolutely necessary when the product is used together with a sprayable PE package. After use, turn the jar upside down and spray until the nozzle is empty. Universal 2K filler for repairing small and medium-sized surfaces on uncoated steel sheets, UP packages and old paint surfaces.
- Product length/depth: 6.8cm
- Product width: 6.8cm
- Product height: 15.7cm
CLP
Signal word : Danger Hazard statements : H222 Highly flammable aerosol. H229 Pressurized container: May burst when heated. H319 Severely irritating to eyes. H336 May cause drowsiness and dizziness. H351 Suspected of causing cancer. H412 Harmful to aquatic life, long-term adverse effects.
