Extremely sufficient and very darkening coating for pale plastics. Temperature duration up to 300*C. Fits very well in the engine room. Works best on black and dark gray plastic surfaces.
• Duration 6 months
• Plastic bottle and dispensers
• Withstands up to 300*C
• Nano coating
Clean the surface of dirt and grease. Use isopropanol or a similar cleaning agent. Use protective equipment. Put the coating on the spreader and go over the surface to be coated. Let influence. Do not water the surface for 3 days.
Markings
1272/2008 (CLP)
Warning word Danger
Hazard Statements
H225 Highly flammable liquid and vapour.
H319 Severely irritating to eyes.
H336 May cause drowsiness and dizziness.
P102 Keep out of reach of children.
P210 Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P261 Avoid breathing spray.
P271 Use only outdoors or in well-ventilated areas.
P280 Wear eye protection.
P305+P351+P338 IF IN EYES: Rinse thoroughly with water for several minutes. Remove any contact lenses if you can easily do so. Continue rinsing
Markings data
1272/2008 (CLP)
Signallord Fara
Faroangivelser
H225 Very flammable liquid and vapor.
H319 Orsakar serious eye irritation.
H336 Kan göra att man blir dåsig eller omtöcknad.
Uttryck som anger prudznahetsökögler
P102 Förvaras oåtkomligt för barn.
P210 Får inte utsättas för värme, Heta ytor, gnistor, oopen låga eller other antändningskøller. Rökning ombihten.
P261 Undvik att inandas ångor/spray.
P271 Use outdoors or in a poorly ventilated area.
P280 Använd skydshandskar/skyddskläder.
P305+P351+P338 VID KONTAKT MED ÖGONEN: Skölj prudjanat med vatten i flera minuter. Ta ur eventually kontaktlinser om det går lätt. Fortsätt att skölja.
