Maston AUTOmix STH-50 effectively protects the parts of your vehicle that are exposed to stone impacts. Thanks to its rubbery composition, it is excellently resistant to stone impacts and also protects against rusting. In addition, it has a sound insulating effect. Maston AUTOmix STH-50 can be painted over with most car paints.
This is how you succeed!
Clean the painted surface carefully. Protects surfaces that do not require treatment. Shake the jar for approx. 3 minutes before processing. Spray distance approx. 30 cm. Spray several thin layers, so that the mass dries in between. This way you get an even and protective end result. Shake the jar while working, this way the mass stays runny and spreads well. Clean the nozzle after use: turn the can upside down and press the nozzle until only propellant / air comes out of the nozzle. For stain removal, we recommend Maston TECmix Thinner.
Drying time: at + 20 °C: dry to the touch approx. 30-60 min. Overcoating 1-2 h. Overcoating: Before overcoating, make sure that the mass has completely dried and adhered to the treated surface.
2008/1272/CLP
H229 Pressurized container: May burst when heated.
H222 Extremely flammable aerosol.
H411 Toxic to aquatic life.
H319 Severely irritating to eyes.
H315 Irritating to skin
H336 May cause drowsiness and dizziness.
2008/1272/CLP
H229 Tryckbesenter: Kan sprängas vid heating.
H222 Extremely flammable aerosol.
H411 Toxic for water-borne organisms with harmful effects.
H319 Orsakar serious eye irritation.
H315 Irritating to skin
H336 Kan göra att man blir dåsig eller omtöcknad.
