KKC; genuine and original, fully adjustable, laminate stock. The stock weighs about 1.1 kg, depending on which rifle it is made for. It is possible to adjust the length of the stern from 34.5 cm to 36.1 cm. The tail length can be adjusted up to 37.7 cm with the optional tail adjustment pieces.
KKC supports combine functionality, ergonomics and aesthetics all in one package. The background of every KKC is advanced technology, excellent craftsmanship, perfect craftsmanship, passion and enthusiasm for the product.
Every detail of the KKC log has been carefully considered. The Norwegian Kjetil Kverndokk, the designer of the trunk, has won the designer of the year award from the Norwegian Institute of Art and Design thanks to this product!
Material:
The KKC log is made of laminated birch. The material is almost lifeless, so heat/humidity conditions cannot affect it. Thanks to the through-dyeing, e.g. the pipe gutter can be worked on and after oiling the surface will be exactly the same color as when new (We recommend KKC Danish oil for oiling). The KKC log is treated with linseed oil. Its surface is pleasant and easy to maintain with KKC Stock Oil.
The properties of the laminate together with the design make KKC logs a very strong and stable log.
Features:
FRONT BLOCK
You haven't experienced anything like it before. In the design of the forehand, a lot of human ergonomics has also been studied, and the shape fits perfectly into the palm of the hand. You get a good grip from the wide front support, no matter where you want to grip the log. The laser-engraved grip surfaces guarantee that your grip will not slip from recoil. The front part of the stock also enables the use of bipods without problems.
PISTOL HANDLE:
KKC's strength is crystallized in the pistol grip. The ergonomics of the wrist have been taken into account in the design of the pistol grip. It is suitable for both small and large-handed shooters, and the wrist position is natural and relaxed. Whether you shoot standing or sitting. You'll be alert and ready for every shooting situation without tiring your wrist. The laser roughening gives a firm grip and the trigger finger has been given excellent support. The design of the pistol grip enables a good grip even in fast situations. All of these allow for a flawless launch.
REAR EQUIPMENT:
Appearance:
The well-shaped soft rubber butt plate is pleasant to shoot and aim. The structure is made so that the recoil sensation is lower than normal.
Settings:
The tail device (tail plate) has adjustments in the up-down direction, so you can change the position of the tail plate as needed (cf. horizontal shooting/vertical shooting) almost steplessly. The draw length is adjusted by adding or removing extension pieces from the logs. The pull length can be adjusted in 8mm increments.
The key needed for adjustment is always conveniently carried with the KKC log, as it is integrated into the rear strap link.
CHEEK PACK:
The cheek pad is pleasantly shaped rubber. The cheek pack can be adjusted steplessly with the help of the included belt loop hex key. The cheek pad adjusts up and down.
INSTALLATION
Installation is easy. Log's so-called "drop in", i.e. the irons can be installed in the logs as they are. Of course, if you want, the irons can still be pushed into the logs, but there is no need for tolerances.
Fit
Tikka T3 CTR
