FLASHFORGE 3D Printer Adventurer3
Minimalist design
Detachable nozzle
Removable flexible base
150x150x150mm Print volume
Filament sensor
Adventurer 3, makes 3D printing easy
Automatically load and unload filaments
Creative design for pre-filament feeding, just put the filaments in the inlet and wait for them to load into the nozzle.
Detachable nozzle
Just three steps to change the nozzle. Easy and fast.
Touch screen user interface
The 2.8-inch touch screen makes every moment clear. It also shows real-time print status.
The heated flexible base makes it easier to remove objects
The Adventurer3 is equipped with a heated base that can withstand up to 100 â "ƒ. Objects are easily attached to the base, regardless of size. Thanks to the flexible base, you can easily remove objects by simply bending it.
Built-in camera
With FlashCloud or PolarCloud, you can monitor the printing process using the built-in camera.
Good print results
Adventurer3 has an excellent print result. The measurement accuracy is ±0.2mm, which is the same accuracy standard as $1000 FFF 3D printers on the market.
Note! The same quality cannot be guaranteed with third party filament.
Supports ABS
With a sealed print chamber and heated base, the Adventurer3 supports ABS, which is often used in industrial applications.
An efficient ecosystem
FlashPrint offers standard and expert modes. Standard parameters that have been tested countless times guarantee great print results. In expert mode, you can easily adjust parameters to suit third-party filament or more complex printing environments.
Printing Farm function is possible with Adventurer3 via FlashCloud. Various print files can be sent to the machine park via WLAN, and monitoring of the print process is also supported.
The internal filament holder supports rolls weighing up to 0.5 kg. If you want to use larger rolls, there are external filament holders. These can be found online and printed on their Adventurer 3.
In a box
3D printer
250 g of filament
Power cord
Screwdriver
Scraper
hex wrench
Fat
Technical information
Print
Extruder number 1
Extruder diameter 0.4 mm
Extruder maximum temperature 240 â "ƒ
Maximum substrate temperature 100 â "ƒ
Print speed 10-100 mm / s
Compatible filaments: PLA / ABS
Print volume 150 * 150 * 150 mm
layer resolution 0.1-0.4 mm
Print resolution ± 0.2 mm
Unit
Unit size 388 * 340 * 405 mm
Display 2.8 inch touch screen
Net weight 9 kg
Gross weight 13 kg
Input 100-240 VAC, 47-63Hz
Output 24 V, 6.25 A.
Power 150 W
Coil hole diameter 52 mm
Includes cable diameter 50 * 200d * 52h
Internal storage 8GB
Software / Communication
Data transfer USB memory, Wi-Fi, Ethernet FlashCloud, PolarCloud
FlashPrint software
Printing .gx / .g files
Input .3mf / .stl / obj / .fpp / .bmp / png jpg / jpeg files.
Other
Camera 1
Filter fan - accessory
Noise <45 dB
Working environment 18-30 â "ƒ
