Durable protection for a snowmobile or ATV.
- Stable width: 2.1 m
- Stall length: 3.5 m
- Stall height: 1.9 m
- Door opening height: 1.80 m
- Door opening width at the bottom: 1.90 m
- Door opening width at the top: 1.60 m
- Number of arches: 5 pcs
- Passable
- Cover: PVC 500 g/m²
- Color: gray (the shade may differ from the picture)
- Tubes: Galvanized steel frame 38 x 1.0 mm, 38 x 1.2 mm
- Warranty: 12 months
Suitable spare cover: 101824405 Prohall 3.5 x 2 m 500g gray spare cover
Note! The stable should be firmly attached to the ground or foundation and placed as well as possible to protect it from the wind. Brackets are not supplied with the stable. It is the responsibility of the stable erector to obtain fasteners suitable for the platform to be used AND FOR THE STRUCTURES OF THE STALL, which ensure that the stable stays in place even in strong winds.
For winter use:- The roof of the stable must always be kept clean. Make sure that the snow that has fallen does not remain on the roof of the stable.
- The stable cover must be tight. There must be no "bags" in the cover, especially in the upper parts of the stable.
- The roof of the stable stays clean better when the cover is tight.
- It must be ensured that the frame of the stable is straight throughout. If the stable is set up against the ground, there is a risk that the frame of the stable is not straight and that weakens the durability of the frame.
- Under no circumstances should the roof of the stable be emptied of snow by pushing the blanket from the inside. It can be life-threatening.
- Always empty from the outside with a tool that does not damage the cover.
- The warranty does not cover a stable that has collapsed due to a snow load.
+19,99
+159,00
