Repair compound for ABS plastic.
Manual:
Clean the damaged area of dirt and loose or poorly attached pieces of plastic. Sand around the damage with sandpaper and bevel the edges of the hole. Mix the hardener and the mass together. The quantities included in the jars are exactly in proportion to each other; so use the contents of both jars in their entirety. Check that the damaged area is absolutely dry. Apply the repair compound with a spatula so that the compound is slightly higher than the original surface. When the patched area feels firm and elastic, smooth it with a rasp or sandpaper. If the damaged area is in a place subject to heavy stress, strengthen the area to be repaired with a soft cross-woven fiberglass mat (rowing).
The working temperature must be at least 15 degrees.
Canning time 50 minutes.
Open time 100 minutes.
Drying time 24 hours.
Read the package leaflet before using the product. Contains irritating ingredients.