Portable SteyrTek ST-P30Q scissor lift with 1 meter lift.
230 V light current version.
A particularly low 105 mm scissor lift. Easy and quick to install.
Wheels optional.
- You can and should buy a set of wheels for the lift. All you have to do is lift the lift up a little, put the wheels in place easily in a few seconds, and lower the lift and it goes up on its wheels by itself. The wheel set also includes a drawbar. The lift can be easily moved by one person.
- The crane's ingenious geometry enables a particularly low height of 105 mm, which makes it easy for the crane to drive even with low cars.
- In the initial phase of the lift, the additional lever pushes the initial lift of the scissors by resting on the floor, which enables an exceptionally low structure and a smooth lift even in the initial phase of the lift.
- Both Saks have their own cylinders and reliable mechanical locking. Which guarantees safe lifting.
- The equalization technology is based on the use of two pairs of cylinders connected to a cross. Thus, the stability of the lifter is excellent. Thanks to its problem-free construction, SteyrTek's service life is many times that of conventional lifts.
- The lift takes up very little space in your workshop and increases the productivity of your workshop by adjusting the number of parking spaces.
- Pipe break valves in the hydraulic pipeline, thanks to which the hydraulic locking works even in the event of a pipe break.
- The crane is not attached to the floor, but can be moved very quickly. There are no other special requirements for the floor, except that the floor must support and be as straight as possible.
- High quality and strong construction make SteyrTek stable and reliable.
Technical information:
- Lifting capacity: 3000 kg
- Lifting height: 1000 mm
- Height in lower position: 105 mm
- Driveway length: 1400 mm + mobile ramps on both sides with quick locking for extension.
- Bridge width: 550 mm
- Operating temperature: -10 to +50 C
- Withdrawal time: 50 s
- Power supply: 230 V, requires a 16A fuse
- Sound level: <70 dB
- Total width: 1790 mm
- Total weight. 540 kg
