The folding garage is intended for storing small machines such as sleds, motorcycles and ATVs.
The stable is a folding model, but the structure is still sturdy and can be used all year round, providing protection for e.g. from dust, snow and moisture. The stable has metal arches that are intended to withstand the conditions of the north, and the protective fabric is waterproof and UV-protected. There are ventilation windows on both sides of the stable in case of excessive heat and humidity.
Using the stable is really easy and smart - lift the short edge up, drive in and jerk the edge back down. The accordion shape of the stable guarantees effortless use.
Note! The roof of the small machine cover must be cleaned before opening.
- Size (L x W x H): 345 x 135 x 190 cm
- Fabric: 300D Oxford PVC
- Frame: Powder-coated 22 x 0.8 mm steel tube (anti-rust protection)
- Water resistant and UV protected
For winter use:- The roof of the stable must always be kept clean. Make sure that the snow that has fallen does not remain on the roof of the stable.
- The stable cover must be tight. There must be no "bags" in the cover, especially in the upper parts of the stable.
- The roof of the stable stays clean better when the cover is tight.
- Make sure the frame of the stable is straight all the way around. If the stable is piled against the ground, there is a risk that the frame of the stable is not straight and that weakens the durability of the frame.
- Under no circumstances should the roof of the stable be emptied of snow by pushing the blanket from the inside. It can be life-threatening. Always empty from the outside with a tool that does not damage the cover.
- The warranty does not cover a stable that has collapsed due to a snow load.