Popular Portable Winch PCW3000 now battery operated. Despite its lightness (9.5 kg), the towing capacity is enough for 1000 kg. The power source is a 1KW electric motor, for which an 80/82W 2-6 Ah battery is suitable. With a 2.5Ah battery, the operating time is approx. 45 minutes and with a 5Ah battery, approx. 90 minutes. Perfectly suited for shorter-term traction needs and, best of all, also for indoor use.
Technical information:
- Maximum capacity in direct pull 1000 kg
- Maximum load through the block 2000 kg
- Three speeds: Speed 1 - 8.1 m / min, Speed - 10 m / min, Speed 3 - 11.6 m / min
- Rope diameter 10-13 mm
- 1kW 82V max electric motor with overload protection
- 3-speed gear transmission
- Oil bath lubrication system
- Water and dustproof according to IPX3 classification
- Dimensions: 318 x 302 x 310 mm
Sold without battery and charger. Battery and charger sold separately.
List of suitable batteries:
GREENWORKS PRO 80V – 2Ah
GREENWORKS PRO 80V – 4Ah
GREENWORKS COMMERCIAL 82V – 2.5Ah
GREENWORKS COMMERCIAL 82V – 5Ah
POWERWORKS 82V – 2.5Ah
POWERWORKS 82V – 5Ah
CRAMER 82V – 3Ah
CRAMER 82V – 6Ah
STIGA VOLTAGE 80V – 2.5Ah
STIGA VOLTAGE 80V – 4Ah
STIGA VOLTAGE 80V – 5Ah
BRIGGS & STRATTON 82V MAX – 2Ah
BRIGGS & STRATTON 82V MAX – 4Ah
BRIGGS & STRATTON 82V MAX – 5Ah
PORTABLE WINCH 82 V – 2.5 Ah
Important to remember when choosing equipment for winching
- The maximum capacity of the winch must be much greater than the resistance of the average loads pulled by the winch. Correctly dimensioned loads extend the life of the winch and enable a momentary increase in the load, e.g. when a log hits an obstacle.
- Whenever possible, use a running cone or a similar aid that reduces the friction of the platform and the risk of sticking.
- The breaking strength of the steel wire or rope used in pulling should be at least 2 x greater than the maximum capacity of the winch used.
- The breaking strength of the auxiliary pulley wheel should be at least 2.5 x greater than the maximum capacity of the winch used.
- The breaking strength of the anchor belt to be attached to the pulley wheel or winch should be at least 3.5 times greater than the maximum capacity of the winch being used.
- The diameter of the pulley wheel, calculated from the bottom of the groove, indicates the maximum diameter of the steel wire or rope to be used. The diameter of the steel wire or rope may be a maximum of 10% of the diameter of the wheel.
