OPAL water heaters can be installed vertically on the wall and are ideally suited for, for example, leisure apartments. The wall installation allows placement in the kitchen cabinet on top of the sink, so the floor area is not wasted. The indicator light indicates when the water heater's resistance is on, and the thermostat on the bottom can be used to easily adjust the appropriate hot water temperature and also change it if necessary.
The OPAL charger is made of white epoxy-painted steel and the end parts are made of white plastic. Magnesium anode
protects the tank and the separate ohmic resistor prevents wear of the resistor. Electrically, the installation is easy, because the charger has a plug connection with a 1.3 meter cable and a 10A fuse is enough (230V). A group of safety devices must always be installed in the accumulator for pipe connections. (not included, sold separately, product number 102192234). The OPAL safety device group includes a shut-off, safety, and mixing valve. Size of pipe connections ½”.
Attention has been paid to the durability of OPAL water heaters. The container is made of steel, the inside of which is enamelled.
The magnesium anode protects the tank and the separate ohmic resistor prevents wear of the resistor. Dielectric
the corrosion protection of the pipes extends the life of the product. Because of these things, we give the tank a 3-year warranty and other parts a 2-year warranty. The insulation is polyurethane (CFC-free), thanks to its high density (36 kg/m 3 ), heat losses have been minimized. The products are approved by FIMKO for an operating pressure of 10 bar. The test pressure is 13 bar. The products are also CE approved. The volumes of the vertically installed OPAL water storage tanks are 15, 30, 50, 80 and 100 l.
Technical information:
Volume: 15 liters
Power: 2000W
Heating time: +40-60°C: 0h 11 min
Heating time: +10-60°C: 0h 27 min
Empty weight: 9.5 kg
Dimensions: 40x33.8x34.5 cm
Note, the safety device group must be purchased separately!