For gluing floor and wall materials.
Startac Combi is a solvent-free, low-emission floor and wall adhesive. Very good wet and adhesive gluing properties and a strong "adhesive property" when installing. The adhesive has a fast increase in holding strength. Can be easily applied either with an adhesive spreader or with a roller. For gluing in both dry and wet areas. Meets EC1 requirement level EMICODE. Emission class M of construction materials
Area of use
• PVC floor mats
• PVC wall mats, at least 0.6 mm thick
• Polyolefin
• Linoleum with backing layer
• Polyester-backed linoleum sheets
• Foam-backed textile carpets
• Insulation film
Chassis
• Leveled floor surfaces
• Floor chipboards
• Floor gypsum boards
• Wall plasterboards
• Leveled wall surfaces
Special requirements
• When gluing to a concrete base, the relative humidity must not exceed the AMA Hus guideline values.
• When gluing jute-backed linoleum, it is recommended to use Bostik Linotac Plus or Bostik Linotac glue
