Even distribution. Even and thin wetting of the target area.
Sufficient thanks to constant spray pressure. Excellent adhesion.
Dries quickly Suitable for the following plastic parts, among others: PP, PP/EPDM, ABS, SAN, PC, PA, PUR-RIM, R-TPU, PPO, PBT, PUR soft foam and UP-GF plastics. Lightly roughen the surface to be treated and clean it carefully with a silicone remover. The surface must be clean, dry and grease-free. Shake the jar vigorously before use for about 2 minutes. Spray the spray once in a thin layer (1–2 µm) from a distance of about 20–30 cm. Can be painted after about 10 minutes with all coatings on the market. Not suitable for PE surfaces, Styrofoam foam and synthetic resin coatings. After use, turn the jar upside down and spray until the nozzle is empty. Plastic treatment adhesion improving agent for repainting plastic parts.
- Product length/depth: 6.7cm
- Product width: 6.6cm
- Product height: 20cm
CLP
Warning word : Danger
Hazard statements : H222 Extremely flammable aerosol. H229 Pressurized container: May burst when heated. H315 Irritating to skin. H319 Severely irritating to eyes. H336 May cause drowsiness and dizziness. H373 May cause damage to organs through prolonged or repeated exposure
