Excellent adhesion
Stays shiny after drying
Smooth edges
Ideal for touch-up painting and spot repairs. Lacquering, finishing. Sand the surrounding area from a wide area to a properly shallow one. Shake the jar vigorously before use for about 3 minutes. After the two-component clear varnish or two-component coating is applied, spray a thin layer of the product several times on the edge of the clear two-component varnish or two-component coating until the surrounding area is even. Can be used without evaporation time. If necessary, the finished surface can be polished when it has completely dried (after 12 hours at a temperature of 20¬°C; after approx. 15 minutes with infrared drying) Turn the jar upside down after use and spray until the nozzle is empty. Finishing varnish for creating an even-toned painting result in the peripheral areas surrounding the repair point.
- Product length/depth: 6.7cm
- Product width: 6.8cm
- Product height: 19.8cm
CLP
Warning word : Danger
Hazard statements : H222 Extremely flammable aerosol. H229 Pressurized container: May burst when heated. H319 Severely irritating to eyes. H336 May cause drowsiness and dizziness
