Good adhesion properties to many different surfaces; suitable for use with sealing compounds containing PU and MS polymers.
Adheres well to aluminum, uncoated and galvanized sheet metal, steel, old paint, etc.
Fast-drying, depending on the thickness of the coating, it can be painted over after about 10-15 minutes
Heat resistance up to 80 °C, temporarily up to 140 °C
Easy to sand
Contains less solvent
The amount of VOC compounds is in accordance with the maximum amount stated in the VOC Directive (1999/13/EC). Vehicle manufacturing, shipbuilding, metal and steel construction, tool manufacturing, bridge construction, tank manufacturing, pipe manufacturing, container manufacturing, agriculture and forestry, municipal services, Construction machinery, etc.
The surface must be clean, dry and grease-free. Remove loose rust, paint and dirt with a wire brush or spatula, for example. Lightly sand problem surfaces before use. Shake well before use. First apply a thin layer of spray. Consider the evaporation time. The drying time is 25 minutes, the surface can be painted after about 10–15 minutes with a commonly sold 1- or 2-component paint or water-based top paint. After use, turn the jar upside down and spray until the nozzle is clean. Active corrosion protection agent and primer for metal surfaces.
- Product length/depth: 6.8cm
- Product width: 6.8cm
- Product height: 20cm
CLP
Warning word : Danger
Hazard statements : H222 Extremely flammable aerosol. H229 Pressurized container: May burst when heated. H315 Irritating to skin. H318 Causes serious eye damage. H336 May cause drowsiness and dizziness.
