- Rubber-based, solvent-containing mass, to be painted over
- Excellent adhesion, forms a film quickly
- Resistant to scratching
- Can be painted over with many commercially available solvent or water-based 1- or 2-component surface paints.
- Suitable for short-term oven drying at a temperature of 40–60°C
- Excellent protection against stone erosion
For professional use
- Can be used to paint many different objects while controlling the distance, quantity and/or pressure
- Coating with clear varnish darkens the color
- Resistant to water, splash water and stone chips
Area of use:
For repairing and restoring the original texture and protecting all visible areas from scale and corrosion, for example front, side and rear skirts, bumpers and undercarriage of cars, trucks and buses. Especially suitable as a noise dampening agent for tire casings and chassis.
Instructions:
Shake well before use. The surface must be clean, dry, dust-free and rust-free. For better adhesion, spray the first coat very thinly and let it evaporate for about three minutes. Then apply the next layer. Allow each intermediate layer to evaporate sufficiently. Operating pressure: 2–4 bar. Optimal spraying distance: 30cm. The best results are obtained at a processing temperature of 15–25°C.
Note:
Do not spray on moving parts, engine, transmission or brakes. After use, turn the jar upside down and spray until the nozzle is clean. Do not dilute or mix with water or paint. The product can be painted after 24 hours at the latest. The surface must then be pre-treated with a primer.
The instructions for use are recommendations based on our tests and our own experiences. Always test the product yourself before use. Since there are many uses and the storage and use conditions vary, we cannot take responsibility for a certain end result. We are not responsible for the advisory services or technical information provided by our free customer service, except if these advisory services and/or technical information are included in the contractual services binding us or if the customer service employee acts intentionally wrongly. We guarantee the consistent quality of our products. We reserve the right to technical changes and product development.
Markings: 2008/1272/CLP
Warning word danger
H225 Highly flammable liquid and vapour.
H315 Irritating to skin.
H336 May cause drowsiness and dizziness.
H411 Toxic to aquatic life, long-term adverse effects.
P210 Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P233 Keep tightly closed.
P264 Wash skin thoroughly after handling.
P273 Avoid release to the environment.
P280 Use protective gloves/ protective clothing/ eye protection/ face protection.
Marking information: 2008/1272/CLP
Signalordfara
H225 Very flammable liquid and vapor.
H315 Irritating to skin.
H336 Can cause dåsighet och yrsel.
H411 Giftigt för vattenlevande liv med longterma effekter.
P210 Förvaras åtskilt från värme / gnistor / öppna lågor / Heta ytor. Ingen rökning.
P233 Keep container tightly closed.
P264 Wash skin thoroughly after handling.
P273 Undvik övälät till miljön.
P280 Använd skyddshandskar/skyddsklader/ögonskydd/ansiktsskydd.
