The Timcon NL40CUT is manufactured using state-of-the-art inverter technology. The 50 Hz / 60 Hz frequency is converted using MOSFET technology to a high frequency (over 100 kHz), the stepped-down voltage and rectified current, combined with the converted power supply, produce high-power DC welding current using pulse modulation technology. As the current is derived from the inverter, the dimensions and weight of the main transformer have been significantly reduced and efficiency has increased by 30 per cent.
Cuts all electrically conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper and brass. The pack includes a 4-metre-long plasma torch and a 3-metre-long ground cable. All you need in addition is an air compressor.
The cutter has the following features:- Digital display with LED lights
- Stepless power control
- Carrying handle
- Cuts metal up to 12 mm thick
- Optimal for thicknesses of 1–8 mm
- Stabilisation
- Reliability
- Lightweight
- Energy-efficient and quiet
- High cutting speed
- Cuts smoothly with no need for grinding
- With contact ignition (HF)
Technical specifications:- Rated voltage: single-phase AC, 230 V ±15 %
- Rated input power: 6.6 kVA
- No-load voltage: 230 V
- Rated output current: 40 A
- Rated output voltage: 96 V
- Load: 60 %
- Inner diameter of torch: 1.0 mm
- Air compressor pressure: Max. 4 bar
- Air flow: 100 l/min
- Weight: 9 kg
- Dimensions: 40 x 17 x 30 cm