In the event of a power cut on the grid (or from another source, such as a battery or wind turbine system) the ATS detects the loss of voltage and sends a signal to the generator, which begins supplying power to the electrical system within five seconds. During a power cut, the ATS monitors the mains supply until it is satisfied that the mains voltage has returned to an acceptable level. Once power has been restored to the mains, the ATS transfers the electrical load back to the mains and switches off the generator (standby mode).
In normal standby mode, a 12V current flows from the mains via the ATS to the generator’s starter battery to ensure it remains fully charged.
Timco’s mains-connected ATS is simple, cost-effective and takes just a few hours to install. The ATS is usually mounted on a wall. Installation must be carried out by a qualified electrician.
The cabinet dimensions are:- Depth: 120 mm
- Width: 200 mm
- Height: 220 mm
Compatibility:- 102151194 Timco CLE5500SDG 230V DIESEL GENERATOR 6438014226941
- 102151198 Timco SE5000SDG 230V DIESEL GENERATOR 6438014226965