Sinemaster's 5.5 kW diesel generator produces light and power in case of power outages and where electricity is scarcely available.
The 1-cylinder, diesel engine produces electricity at a speed of 3600 revolutions per minute and produces a maximum power of about 5.5 kW. The unit has 3 outputs: one light current output (230 V), one power current output (400 V) and 12 V (8 A) output. Equipped with ATS plug. The 116 kg generator can be moved easily thanks to its four wheels.
The fuel tank holds about 12.5 liters of diesel or fuel oil, which will run this generator all night long at once.
Equipping:- Battery operated electric start for easy starting
- Voltmeter
- Automatic fuses
- Oil warning light
- Fuel gauge
- Equipped with an AVR controller
- Equipped with ATS plug
Technical information- Fuel: Diesel
- Fuel consumption: 1.7 l/h at 100% load
- Operating time: approx. 7 h at 100% load
- Phase count: 3-phase and 1-phase
- Calculated maximum power: 5.5 kW
- Calculated continuous power: 5 kW
- Total power @ 3000 rpm: 9HP
- Engine type: 186FA 418cc
- Fuel tank: approx. 12.5 l
- AVR controller: THD ≤ 20%
- Power factor COS φ: 1.0
- 1 x 230 V light current output
- 1 x 400 V power output
- 1 x 12 V (8.3 A) output
- Electric start (20 Ah battery)
- Centralized lifting point: No, lifting from the handles
- ATS capability: Yes
- Oil volume: 1.65 L
- Recommended oil: 10W-30
- Noise level: 71 dB(A) (7 m)
- Dry weight: 116 kg
- Dimensions: 770 x 540 x 670 mm
- Warranty: 12 months
Accessories: SINEMASTER 400V ATS starter unit
In the event of a power outage in the monitored network, the ATS senses the voltage drop and sends a signal to the generator, which starts supplying power to the interrupted power system within seconds. ATS monitors the entire outage and when it has verified that the grid voltage has returned to an acceptable level, ATS transfers the electrical load back to the grid and shuts down the generator. Note ATS installation requires an authorized professional to make the connection.
