Nokian Eurologger 3 is a CE-approved rubber safety boot according to standard EN345 T2. A roomy insole that fits the Nordic foot well. The boots are intended for use when working with a chainsaw. Nokia's Eurologger 3 meets the requirements of class 3 (28m/s). Boots protect the toes from falling objects or compression. The toe protection can withstand an impact energy of 200 J (EN ISO 20345:2004 / 5.3.2) The rubber boots are suitable for use in wet or damp conditions. The materials used in the boots retain their flexibility well in cold conditions, so when added with sufficient thermal insulation (e.g. loose felt lining), the boots are also suitable for winter use. The soles of the boots are oil-resistant (EN ISO 20345:2004 / 5.8.7)
Features:
- drawstrings
- quick drying tricot lining
- spinous bone reinforcement
- rotationally rigid midsole
- steel tip (200 J)
- oil-resistant base
- studded sole
- patterned mold base resistant to wear and heat
- saw protection, class 3 (blade chain speed 28m/s)
- a splint that fits the Finnish leg
- weight 3268 g/pair.
- EN ISO 17249:2013 E FO HRO SRA
Care
Wash the rubber boots immediately after use with lukewarm soapy water and a soft sponge. The boots cannot withstand solvent detergents. Avoid brushing with a coarse brush. Dry at room temperature without contact with a heat source. Store the safety boots in an upright position in the cool and dark in their natural form without folds. Prolonged daylight causes the so-called the aging phenomenon, i.e. the boot becomes brittle, which shows up as hair breakage. The outer rubber is resistant to oils and most chemicals. As a conditioner for the rubber surface of the rubber boot, we recommend Nokia silicone-containing rubber conditioners or other silicone oil. If the boot has any damage that affects its protective properties, it must be discarded.
