Marabu Do It spray is an easy-to-use, quick-drying spray for crafts and DIY. Do It spray is wipe- and weather-resistant and offers good coverage. Resin-based Do It spray does not contain CFC compounds and it is suitable for use on polystyrene. Do It spray is suitable for coloring many materials, such as cardboard, wood, plastic, polystyrene, glass, stone, metal, ceramics and braided and dry natural materials. Also well suited for stencil work. Very spreading. Instructions: Remove the protective ring from the bottle and shake the bottle vigorously for 2 min. before use. The ideal operating temperature is around 20° C. Spray from a distance of 30 cm. After use, always turn the bottle upside down and spray until the valve is empty (until only air sprays out) so that the valve does not get stuck. The coverage for one bottle is about 2-2.5 m², but if the surface is rough or very absorbent the coverage is less than 2 m². 150ml in a bottle. WARNING: Not for children. Easily flammable. Pressurized bottle, may explode when heated. May cause serious eye damage, malaise or dizziness. Frequent handling can dry out the skin. Save the label for later use. Keep away from heat, hot surfaces and open flames. Do not inhale the product. If the product gets into the eyes, rinse for several minutes. Recycle like hazardous waste.
