The Makita DF001G is a very powerful drill for the demanding professional. Makita's most powerful drill is equipped with electronic torque control and an acceleration sensor that stops the machine if the blade jams. This safety feature prevents the user's wrist from twisting.
- Torque selector for adjusting the clamping torque, visual confirmation of the selected torque on the digital display.
- Improved dust and water resistance thanks to XPT (Extreme Protection Technology).
- Battery protection system automatically cuts off the power supply when the battery is low on charge.
- Active feedback detection technology (AFT) shuts down the motor if the rotation suddenly stops.
- The DF001G drill has a selection panel with digital display to select the desired clamping torque. The different torque ranges are 41, 1-45 Nm for 1st gear and 21, 1-10 Nm for 2nd gear. An electronic torque control stops the machine when the desired torque is reached. The high speed range of 0-2600 minˉ¹ is ideal for both small and large blades. Safety-enhancing AFT technology prevents potential wrist injuries by shutting down the motor if the rotary motion of the drill bit is suddenly stopped by an obstacle. The DF001G is equipped with a long-life and powerful carbon brushless motor.
The capacity of the 40 V 2.5 Ah battery is approximately 40 pieces of SPAX screws, diameter 8 mm, length 400 mm, in 400 mm thick wood, approximately 90 pieces of drilled holes in 38 mm thick wood with a 65 mm diameter self-feeding drill bit and approximately 480 pieces of drilled holes in 38 mm thick wood with a 22 mm diameter twist drill bit.
Suitable for use as a chipper thanks to the standard side handle and strong torque
Makita's XGT system has built-in digital communication between the battery and the machine. This allows the battery to communicate with the tool and vice versa. The battery also recognises and stores in memory the tools it is used with. The XGT machines have a powerful carbon brushless motor that allows for longer run time per charge.
This product comes with a Macpac case, a 2.5 Ah battery and a DC40RA quick charger. Charging time for the 2.5 Ah battery is approximately 28 minutes.
Specifications:
- power source: rechargeable battery
- voltage: 40 V
- battery type: XGT
- battery protection system
- 2 x 4.0 Ah batteries and charger included
- charging time 4.0 Ah: 45 min
- speed: 0-650 / 2600 min-¹
- torque hard / soft: 140 / 68 Nm
- torque adjustment range: 41 / 21
- capacity wood: 76 mm
- capacity steel: 20 mm
- drill bit thread: 1/2"-20UNF"
- drill bit capacity: 1.5-13 mm
- led light
- sound pressure level (LpA): 75 dB (A)
- noise tolerance (K-factor): 3 dB (A)
- vibration value drilling: ≤ 2.5 m/s²
- vibration tolerance (K-factor): 1.5 m/s²
- Weight with battery (EPTA): 2.7-3.0 kg
- Product dimensions (p x l x k): 181 x 86 x 282 mm
Makita expands its battery-powered product offering in the market with the launch of the 40V Max XGT series, which is stronger in battery technology. The XGT series has been developed alongside the industry-leading 18V LXT series to provide customers with more powerful battery-powered machines and equipment for their cordless jobsite needs. Kärkkäinen's range includes all professional XGT cordless tools and accessories. 40V and 18V batteries are not compatible. The new XGT 40V series has been developed to meet the needs of the most demanding end-users and enables the development of even more powerful cordless machines. The highly advanced communication between the battery and the machine also enables the introduction of any new battery technology in the future.
Kärkkäinen Oy is an authorized official Makita dealer and for machines purchased from us, upon receipt, you can register an extended 3-year warranty within 4 weeks from the date of purchase. By registering your product, you will receive an additional two-year warranty in addition to the one-year factory warranty. Read the detailed warranty conditions and register here https://www.makita.fi/3-year-warranty.html
