A very precise screwdriver with an electronic torque sensor intended for assembly work. Ergonomic and light machine for continuous use. The very light and short-movement switch also adds to the comfort of use. The compact device fits even in tight spaces - only 26mm from the center of the screw tip to the top edge of the machine. Weight with 2.0Ah battery only 1.4 kg. The bright and adjustable double LED light clearly illuminates the work site.
When screwing, the machine stops when the desired tightening torque is reached and the green indicator lights up for a moment. If there is something wrong with the connection and the tightening does not take place as it should, the machine beeps and the red indicator lights up. A low battery is warned by an indicator light before the battery is completely empty. The indicator lights also indicate the need for future maintenance. The machine itself does not require maintenance other than normal cleaning, but the user can define the desired maintenance interval.
The desired tightening torque is set between 2-6Nm with a computer program. Rotational speed adjustable between 50-1000 min-1. The program can also be used to adjust different steps for tightening, e.g. at first a round with the pack to ensure the screw hits the thread, then full force to remove the ""empty"" from the long screw, and at the end slow down to slower rounds to get the final tightening under control. All this automatically and very quickly by pressing the operating switch.
The frame version is delivered without battery and charger. Recommended battery 18V / 2.0Ah
Usage benefits
Brushless, maintenance-free and long-lasting motor.
The battery protection system protects against overload, undervoltage and overheating
