The powerful 40 A plasma cutter is ideal for cutting a wide range of metals such as steel, stainless steel, aluminium and copper with precision and speed.
Cutting thickness up to 20 mm: Enables clean and neat cuts
for the most demanding metalworking projects.
Powered from a 230 V household socket, making it easy
to use in many environments.
Plasma cutting is an economical method because it uses only
compressed air (or other inexpensive gases) and does not require expensive gas mixtures,
like oxygen-acetylene cutting.
The package includes a pressure regulator (pre-installed on the machine)
HF-CUT
20 mm Max. Cut
40A
LED display
TPOST Adjustment:Controls the afterburner time, which determines the length of time the shielding gas flows after the cut is completed.
This helps cool the cutting nozzle and protect the cutting surface from oxidation.
HF CUT:Allows the arc to ignite without the cutting nozzle having to touch the workpiece, reducing wear and improving accuracy.
2T/4T:2T: Cutting or welding begins when the trigger is pressed and ends when the trigger is released.
<4T: Cutting or welding begins when the trigger is pressed and released and ends only when the trigger is pressed and released.
Package contents:- Plasma Cutting Inverter Kempten CUT 20 mm
- Plasma torch 4 m
- Plasma cutting cable and clamp 1.5 m / 8.8 mm²
- Manual Finland and Sweden
Technical specifications:- Voltage: 230 V, 50/60 Hz
- Functions: PLASMA CUTTER
- Nominal input power (KVA): 7.8
- Nominal input current (A): 34/19
- Unloaded voltage (V): 290
- Output current (A): 20-40
- Output voltage (V): 88-96
- Load-to-load ratio (%): 30
- Efficiency ratio (%): 83.6
- Power factor: 0.63
- Enclosure class: IP21S
- Electrical class: H
- Mode of operation: contact
- Impulse compressor pressure (MPa): 0.3-0.45 (43.5-65.3 PSI)
- Nozzle hole diameter (mm): 0.9
- Cutting depth Max: 20 mm
- Rotary cutting: Yes
- Rated power: 6.8
- Size: 415 x 145 x 245
- Weight (kg): 6.4 kg
