A balanced share of glass fibers
- Excellent spreading properties
- Easy to use
Grips and stays well
- Suitable for vertical surfaces
- Excellent adhesion to iron, steel and aluminum surfaces as well as galvanized and hot-dip galvanized surfaces.
- Well suited for use on fiberglass reinforced plastic parts after they have been repaired with VAKU 80 repair resin.
Dries quickly
- Fast post-processing, saves time.
VAKU 70 package maximum allowed VOC content: 250g/l in product category 2(b). The maximum permissible VOC content according to the German regulation on solvent-based paints and varnishes (ChemVOC FarbV): 4g/l.
Heat resistance up to 80°C
Tip: Can be covered with VAKU 20, VAKU 30 and VAKU 40 packages without sanding between layers.
To avoid possible complaints, always ensure the correct dosage ratio of the package and the hardener.
Markings: 2008/1272/CLP
Warning word danger
H226 Flammable liquid and vapour.
H315 Irritating to skin.
H319 Severely irritating to eyes.
H361d Suspected of damaging the unborn child.
H372 Causes damage to organs through prolonged or repeated exposure.
P201 Read special instructions before use.
P210 Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P260 Do not breathe mist or vapour.
P264 Wash skin thoroughly after handling.
P280 Use protective gloves/ protective clothing/ eye protection/ face protection.
Marking information: 2008/1272/CLP
Signalordfara
H226 Flammable liquid and vapour.
H317 Can cause allergic skin reaction.
H319 Orsakar serious eye irritation.
H361d Misstänkt för att skada det ofödda barnet.
H372 Orsakar organskador genom long-term eller ektetad exposure.
P201 Read special instructions before use.
P260 Andas inte in ånga / spray.
P264 Wash skin thoroughly after handling.
P280 Använd skyddshandskar/skyddsklader/ögonskydd/ansiktsskydd.
