- Very flexible
- Especially suitable for shaping and improving contours
- Very good adhesion
- Dries quickly
- Enables fast further processing, which saves time
- Easy to sand
The maximum permitted VOC content of the VAKU 50 package:
250g/l in product category 2(b). The maximum permissible VOC content according to the German regulation on solvent-based paints and varnishes (ChemVOC FarbV): 3 g/l.
Heat resistance up to 80°C
Tip: Test the product before use, because there are many different plastic mixtures. It is recommended to pre-treat the object with a 1-component plastic primer to ensure the best possible adhesion.
Not suitable for repairing broken parts.
To avoid possible complaints, always ensure the correct dosage ratio of the package and the hardener.
Markings: 2008/1272/CLP
Word of caution warning
H242 Flammable when heated.
H317 May cause an allergic skin reaction.
H319 Severely irritating to eyes.
H410 Very toxic to aquatic life, long-term adverse effects.
P210 Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P273 Avoid release to the environment.
P280 Use protective gloves/ protective clothing/ eye protection/ face protection.
Marking information: 2008/1272/CLP
Warning for attention
H242 Brandfarligt vid heating.
H317 Can cause allergic skin reaction.
H319 Orsakar serious eye irritation.
H410 Mycket giftigt för water-levande organismer med lättidseffekter.
P273 Undvik övälät till miljön.
P280 Använd skyddshandskar/skyddsklader/ögonskydd/ansiktsskydd.
