Super RTV silicone sealing compound silicone compound (engine silicone/silicone/sealing/sealing/petrol/durable) high-quality sealing compound for industry and the automotive industry. Excellent chemical resistance. Can also be used in critical areas where the seal is in contact with liquids.
- Excellent resistance to engine and gear oil, coolant and anti-icing agent
- No acid is released during curing
- Does not corrode and therefore does not adversely affect electronic components or lambda sensors
- In a sealed pressure pack
- Easy to dose without aids
The finely divided substance is easy to spread evenly Adheres best to a dry, clean and dust-free surface. The old sealant must be completely removed from the surface. The instructions for use are recommendations based on our tests and our own experiences. Always test the product yourself before use. We do not take responsibility for the end result, because there are many uses and the storage and handling conditions of the product vary. We are not responsible for the advisory services or technical information provided by our free customer service, except if these advisory services and/or technical information are included in contractual services binding us, or if the customer service employee acts intentionally wrongly. We guarantee the consistent quality of our products. We reserve the right to technical changes and product development. When sealing, for example, oil sumps and gearboxes, it is extremely important that the sealant does not get into the internal parts. For this reason, we recommend applying sealant to the surface of the joint. Join the parts together, press gently with your hand and gently slide the parts against each other. After this, remove the parts and remove the sealant that has spread inside the part. Reattach the parts within 5 minutes or less and tighten them tightly. Pay attention to the curing time before putting the device into use (determined by the thickness of the sealant).
Markings: 2008/1272/CLP
Warning word: danger
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst when heated.
Marking information: 2008/1272/CLP
Signalord: fara
H222: Extremely flammable aerosol.
H229: Tryckbemsenter: Kan Riva vid heating.
