Leak detector leak spray/leak detection spray/leak agent testing foam, which can be used to quickly and safely locate leak areas, micro leaks and hairline cracks. Easy and quick to apply.
- Reliable diagnosis quickly
- Even very small leaks and those that only appear under high pressure can be found easily
- Non-flammable - can also be used to locate flammable gas leaks
- Operating temperature (–15°C…+50°C), tested according to DIN 51421 standard
- Can be used in cold ambient temperature
- Suitable for cryogenic gases
- Neutral pH value
- Does not corrode metals
- Does not cause stress corrosion to plastics (e.g. PVC or PE)
- Does not cause corrosion
- Physiologically harmless
Suitable for use with oxygen. For pressurized gases such as nitrogen, propane, butane, town gas, acetylene, carbon dioxide, argon and air. The substance is sprayed onto pressurized parts from a distance of about 40 cm. Foam bubbles form at the leak points. If micro-leakage is suspected, observe the sprayed area for a while. Afterwards, rinse the parts with water. The instructions for use are recommendations based on our tests and our own experiences. Always test the product yourself before use. Since there are many uses and the storage and use conditions vary, we cannot take responsibility for a certain end result. We are not responsible for the advisory services or technical information provided by our free customer service, except if these advisory services and/or technical information are included in contractual services binding us, or if the customer service employee acts intentionally wrongly. We guarantee the consistent quality of our products. We reserve the right to technical changes and product development.
Markings: 2008/1272/CLP
Word of caution: warning
H229 Pressurized container: May burst when heated.
Marking information: 2008/1272/CLP
Warning for attention
H229: Tryckbemsenter: Kan Riva vid heating.
