A special powder mixture, made of aluminum oxide
Gentle removal and high-gloss polishing
Effortlessly removes sanding marks from grit P2000
Thick texture
The polish does not splash
Economic
Low dust formation
The surrounding areas do not need to be cleaned again
Can be applied manually or mechanically
For traditional and non-scratch paints
Suitable for new and old paint surfaces
Does not contain silicone Medium-coarse, abrasive high-gloss polish for effective paint surface preparation. Effectively removes sanding marks and scratches on old paint surfaces as well as damaged areas from hardened repair coating. Paint surface preparation: Sanding marks and scratches, restoration of used vehicles. Painted surfaces in the automotive, marine or wood industry. (solvent-based paints, single- and multi-component systems, water-based paints, powder paints, scratch-resistant, clear varnishes). Not for matte paints. Shake well before use. Moisten the surface of the selected polishing pad/pad evenly with the paste and spread it a little on the surface to be polished as well. Place the polishing disc flat against the base and start the machine. Use a speed of 1,500 to 2,000 r/min and keep the pressure constant. Work the surface until the unevenness disappears. Work in parts! Remove excess polish with a microfiber cloth. Due to its chemical composition, the polish is safe when used for its intended purpose.
To ensure an optimal surface without micro-scratches, High-Gloss Polish Plus must never be mixed with other polishing agents or solvents. Otherwise, the warranty will expire.
The original packaging can be stored at a temperature of 15-25 °C for 24 months. Protect the packages from frost and direct sunlight during storage and transport. Medium-coarse, abrasive high-gloss polish for effective paint surface preparation.
Product length/depth: 5.3cm Product width: 5.3cm Product height: 17.7cm
