Good thermal stability
For sealing at temperatures up to 280 °C.
Pressure-resistant up to about 700 bar
Also suitable for high-pressure lines and pressure tanks.
Excellent adhesion
In addition to metals, also seal glass and ceramic surfaces permanently and safely.
Good adaptability
Also suitable for uneven surfaces
Seals 100%
Permanently elastic
Prevents e.g. loosening caused by vibration and impacts
Protects against corrosion
Fills the gaps completely.
Does not contain silicone or solvents
DOS system:
Easy to use with one hand thanks to the convenient screw cap
The other hand always remains free.
Continuously adjustable dosing
The dosage can be precisely adjusted to suit the need, so that consumption and costs remain as low as possible.
There is no sealant left in the neck of the dosing cap
The jar empties almost completely, which improves cost efficiency. Epoxy resin-based sealant can be used on all metals, ceramics and glass. Resistant to high temperatures, the permanently elastic sealing compound is particularly suitable for all flat and grooved sealing surfaces of the engine, flange joints, pressure vessels, hot water heaters, compressors and all screw connections.
Auto industry:
Crankshaft bearings, crankcases, clutches, pumps and steering cylinders for servo systems, hydraulic steering for automatic transmissions, differential and gear housings, valve covers, etc.
Mechanical engineering:
All kinds of pumps, turbines, compressors, generator and gearbox housings, hydraulic systems, etc.
Electrical industry:
Clutches, switchgear, motor housings, etc. The treated surface must be clean, dry and grease-free. If the surface is preheated, the parts can be joined immediately. When working at room temperature, connect the parts only after 5-10 minutes.
More information can be found in the technical data. Not suitable as a cylinder head gasket. Long-term exposure can affect the following plastics: polyvinyl, ABS, SAN, polysulfone, PVC, polycarbonate, polystyrene and painted surfaces. Replacement of solid seals around the engine, pressure tanks and screw connections.
- Product length/depth: 14cm
- Product width: 4cm
- Product height: 4cm
CLP
Warning word : Danger
Hazard statements : H225 Highly flammable liquid and vapour. H319 Severely irritating to eyes. H336 May cause drowsiness and dizziness.
