Partially synthetic oil with excellent pressure resistance. Forms a very tough lubricating film and dampens noise and vibration well.
- Excellent lubrication properties in tight spaces
- Reliable corrosion protection
- Contagious
- The lubricant withstands the centrifugal force of turning and rotating parts
- Good material compatibility
- Compatible with O- and X-rings and plastics Behaves on neutrally painted surfaces.
- Resistant to splash water, salt water, weak acids and alkalis
- Does not contain silicone, resin or acids
Note:
Withstands high pressure loads
The HHS 2000 lubricant film remains lubricated and does not wear out despite high pressure loads or shearing movements of the frame.
Separates the body and the counterpart and ensures optimal protection against wear even under heavy pressure loads. The protection only works when the lubricated surfaces are clean. Therefore, we recommend that the areas to be lubricated are thoroughly and carefully pre-cleaned with HHS Clean, Product No. 089310610.
The instructions for use are recommendations based on our tests and experience. Always test the product yourself before use. Since there are many uses and the storage and use conditions vary, we cannot take responsibility for a certain end result. We are not responsible for the advisory services or technical information provided by our free customer service, except if these advisory services and/or technical information are included in contractual services binding us, or if the customer service employee acts intentionally wrongly. We guarantee the consistent quality of our products. We reserve the right to technical changes and product development.
Markings: 2008/1272/CLP
Warning word danger
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst when heated.
H315 Irritating to skin.
H336 May cause drowsiness and dizziness.
H411 Toxic to aquatic life, long-term adverse effects.
P210 Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not puncture or burn, even when empty.
P261 Avoid breathing spray.
P271 Use only outdoors or in well-ventilated areas.
P273 Avoid release to the environment.
Marking information: 2008/1272/CLP
Signalordfara
H222: Extremely flammable aerosol.
H229: Tryckbemsenter: Kan Riva vid heating.
H315 Irritating to skin.
H336 Can cause dåsighet och yrsel.
H411 Giftigt för vattenlevande liv med longterma effekter.
P210 Förvaras åtskilt från värme / gnistor / öppna lågor / Heta ytor. Ingen rökning.
P211 Do not spray on open fire or any source of ignition.
P251 Hold or burn inte, even after use.
P261 Undvik inundation spray.
P271 Anväst endas outdoor eller i ett väl ventilarat area.
P273 Undvik övälät till miljön.
