Double-acting, centrifugal force-resistant, low-viscosity grease: Oil penetration properties, grease-like adhesion and pressure resistance.
- Sprayed: Oil
- Good penetration properties
- Penetrates well into crevices
- Protects against corrosion
- Gets everywhere, even in places where ordinary grease can't reach
- After sticking: Grease
- Very good adhesion
- No surgery
- Good, long-lasting effect
- Excellent pressure resistance
- Unbreakable lubricant film even under high pressure loads
- Absorbs noise and vibration well
- Good material compatibility
- Suitable for use with O-rings and X-rings
- Suitable for use with plastic
- Behaves on neutrally painted surfaces
- Resistant to splash water, salt water, weak acids and alkalis
Does not contain silicone, resin, acid or AOX compounds Suitable for lubrication in difficult relubrication conditions during maintenance and service work (inner bearings, cables, joints, axles, roller bearings, etc.). Shake well before use. Clean the lubrication point thoroughly. Spray on a clean surface. The instructions for use are recommendations based on our tests and our own experiences. Always test the product yourself before use. Since there are many uses and the storage and use conditions vary, we cannot take responsibility for a certain end result. We guarantee the consistent quality of our products. We reserve the right to technical changes and product development.
Markings: 2008/1272/CLP
Warning word: danger
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst when heated.
H315 Irritating to skin.
H412 Harmful to aquatic life, long-term adverse effects.
Marking information: 2008/1272/CLP
Signalord: fara
H222: Extremely flammable aerosol.
H229: Tryckbemsenter: Kan Riva vid heating.
H315 Irritating to skin.
H412 Harmful to aquatic organisms.
