KLO-100 is a radio frequency remote control that can control all WIRELESS LC and M series receivers. Controlling WIRELESS receivers equipped with a dimmer is also easy.
The range of the controller without obstacles dampening the connection is approx. 30 meters. The radio signal used in the control does not need line of sight between the controller and the receivers, but the connection works, for example, through a wall.
Sixteen (16) receivers can be controlled separately with the KLO-100 remote control.
All WIRELESS controllers use unique fixed device addresses. Even such extensive solutions are built without problems and work without disturbances.
The controller has no continuous power consumption. The battery typically lasts up to years.
KLO-100 TECHNICAL DATA:
- Compatibility: All current Wireless receivers
- Device address: Individual fixed device addresses
- Range: approx. 30 meters in unobstructed space
- Battery: CR2032, 3 V lithium (included in the package)
- Operating temperature: -10 to +45 C (ambient)
- Operating conditions: Dry space
- Radio frequency: 433.92 MHz
- Dimensions: 111x35x16 mm
- Electricity number: 3563012
Improve the lighting control of your home or property, choose a WIRELESS SOLUTION:
• No surface or hidden light switch cables
• Add or move light switches in minutes without adding a single wire
• Control the lamps connected to the socket with a light switch or remote control
• Save time and money when building and renovating
The only wire needed in your lighting system is the supply wire to the fixture. Receivers that are permanently installed in the distribution box or connected to the socket are controlled by surface-mounted remote controls that function as light switches. The collection also includes hand-held remote controls and a remote-controlled motion sensor.
Eliminating the wires of the light switches brings, in addition to the ease of installation, unprecedented modifiability and functionality for controlling the lighting. Switching on, switching off and dimming the light from several points is done in the blink of an eye by using the required number of controllers of the desired model.
There is no need for line of sight, the connection using radio frequency also works through the wall. Individual device addresses make it possible to build a large system without problems, the Wireless system works without interference and power cuts do not affect the programming of the devices.
