- Strong tile roof steps for houses with a facade height of no more than 4 m. N.
- The step rises 100 mm above the gutter of the roof tiles.
- Suitable for 2-wave roof tiles
- The width of the step is 310 mm, and they fit 25 mm rods.
- The steps are made of 2 mm thick perforated plate to make climbing as safe as possible.
- The side supports are made of strong 18x3 mm flat iron.
- The hot-dip galvanized steel used as a material guarantees very good resistance to weather conditions.
- Easy to install by attaching directly to the joists, so that the steps come against the tile roof.
- The steps should be placed so that there is approx. 30 cm between the steps, i.e. the need for 3 pcs/m
- Always installed directly above each other, perpendicular to the ridge of the roof
The steps are not covered by any standard, so they must not be used to attach safety ropes
