Plastic headlamps can dim and yellow with age, reducing the brightness and luminous intensity of the headlamps. With the light brightening kit, you can restore dimmed, yellowed and scratched lights to a bright and shiny appearance, including headlights, taillights, fog lights and turn signals. The treatment improves the performance of your lights and the appearance of your vehicle.
Features:- restores the brightness of yellowed and dimmed headlights
- improves headlight performance
- repairs headlights, taillights, fog lights and turn signals
- The kit can handle two headlights
Includes:- 2 x P800 sanding sheets
- 2 x P1200 sanding sheets
- .2 x P2000 sanding pads
- 1 x orange sponge pad
- 2 x 40 g polishing paste
- 2 x 30 ml UV protection
- 1 x protective tape (300 x 20 cm)
- 1 x sanding disc M10 thread
- 1 x adapter
- 1 x white sponge plate
Instructions for use:- Clean the headlight with water and cover the area around the headlight to prevent scratching
- Wet the sanding disc and attach it to the backing plate. Sand with three different grits to get rid of yellowing, fading and corrosion.
- At the same time, attach the orange sponge pad to the backing plate and apply the polishing paste. Polish the lens until the shine has returned to its original state. Note: If polishing by hand, polish in a circular motion at least 200 turns clockwise.
- Clean the headlight lens and make sure the lens is dry
- Make sure the headlight is not in direct sunlight and apply 5-10 drops of protective liquid to the cleaning cloth. Apply the liquid alternately horizontally and vertically to the lens of the headlight, making sure the liquid is spread evenly.
- Let it sit for 3-5 minutes and wipe off any excess liquid.
- Leave for 24 hours until it hardens completely or use a hair dryer for 1-2 minutes.
