A dent removal kit to remove dents from car surfaces without damaging the car's paintwork. The kit allows you to remove dents caused by small impacts or hail damage from the bodywork of your car, excluding edges and corners.
Package contents:- 1 x glue gun
- 1 x extractor holder
- 1 x rubber mallet
- 7 x extractor
- 1 x levelling pen
- 1 x glue stick
- 1 x plastic scraper
- 1 x knob nut
- 1 x cleaning cloth
- 1 x glue remover
- 1 x instruction manual
Instructions for use:- Insert the glue stick into the glue gun and connect the glue gun to the mains power supply. Allow it to warm up for 10-15 minutes before use.
- Clean the area around the dent with a cleaning cloth and apply hot melt glue to the center of the dent.
- Choose an extractor that fits the dent and attach it to the glue.
- Screw the extractor bracket onto the extractor and adjust it to the desired height. Attach the knob nut and turn it until the dent is pulled out. Stop turning the knob when the dent is level with the car body.
- Place protective gloves on your hands and cover the residual adhesive with a towel for 10-20 seconds to allow the liquid to penetrate the adhesive, then wipe it off.
- If you put too much adhesive on the surface, you can remove it by tapping it with a leveling pen and a rubber mallet.
- If the dent is large, repeat the treatment.
Safety instructions:- Wear safety glasses and durable work gloves when using.
- Contains adhesive: keep out of reach of children. This product is not a toy. Do not allow children to play with it or near it.
- Use only as directed in these instructions.
- Check before each use, do not use if parts are loose.
- Keep product labels and nameplates that provide important safety and technical information about the product.
