The Visbella aluminum wheel repair kit is designed to permanently repair edge damage, scratches, small dents, installation damage, grinding marks and other damage on light alloy wheels. The kit contains everything you need to repair scratches. After processing, the aluminum rim normally withstands washing and weather conditions.
Contents:- 1 pc x repair glue
- 1pc x aluminum alloy
- 1 pc x sandpaper (grit: 1000)
- 1 pc x sandpaper (grit: 400)
- 1 pc x cleaning cloth
- 2 pcs x gloves
- 2 x cleaning pads
- 2 pcs x plastic spatula
Repair steps:- Remove rough edges and unevenness with 400 grit sandpaper.
- Clean and dry the surface with a pretreatment pad and a cleaning cloth.
- Press both cartridges of repair glue out.
- Mix both components with a spatula until you get a uniform gray mass.
- Apply the mass with a spatula to the damaged area and let it dry for 15-20 minutes.
- After curing, use 1000 grit wet sandpaper to sand the contours of the repaired surface to invisibility and obtain a smooth, polished metal surface.
- Clean and dry the polished area.
- Apply the varnish with a brush, let the varnish dry for at least 1-2 hours before driving, the full curing time is about 3 days.
Warning phrases:- Flammable & Harmful
- Keep out of reach of children
- Avoid breathing fumes.
- Use only in a well-ventilated area.
- Irritating to skin and eyes! Immediately wash the skin thoroughly with soap and water. If the substance gets into the eyes, rinse with water for 15 minutes. If irritation occurs, consult a doctor.
