The Visbella aluminium wheel repair kit is designed to permanently repair rim damage, scratches, minor dents, fitting damage, sanding marks and other damage to alloy wheels. The kit contains everything you need to repair scratches. Once treated, the aluminium wheel can withstand normal washing and weather conditions.
Contents:- 1 x repair adhesive
- 1 x aluminium alloy
- 1 x sandpaper (grit: 1000)
- 1 x sandpaper (grit: 400)
- 1 x cleaning cloth
- 2 x gloves
- 2 x cleaning pads
- 2 x plastic scrapers
Repair steps:- Remove rough edges and unevenness using 400-grit sandpaper.
- Clean and dry the surface using a pre-treatment pad and a cleaning cloth.
- Squeeze out both cartridges of repair adhesive.
- Mix both components with a spatula until you obtain a smooth, grey paste.
- Apply the paste to the damaged area with a spatula and leave to dry for 15–20 minutes.
- Once set, use wet 1000-grit sandpaper to sand down the edges of the repaired area until they are invisible and to achieve a smooth, polished metal finish.
- Clean and dry the polished area.
- Apply the varnish with a brush; allow the varnish to dry for at least 1–2 hours before riding; the full curing time is approximately 3 days.
Warning statements:- Flammable & Harmful
- Keep out of reach of children
- Avoid breathing in vapours.
- Use only in a well-ventilated area.
- Irritating to skin and eyes! Wash skin immediately and thoroughly with soap and water. If the substance comes into contact with the eyes, rinse with water for 15 minutes. If irritation occurs, seek medical advice.