Vallox Aito Home Heating is an energy-efficient air heater that can be connected to all heating systems, including low-temperature geothermal systems. It can be installed in place of Valmet Home Heating without major ductwork modifications. It can also replace Aeromaster, Energiset, Himablock, ILA-15, Oilon Oiva, Parma 10 and Thermovent air heaters, among others, although you should be prepared for minor ductwork modifications.
Vallox Aito Kotilämpö air heater has DC fans that consume half the electricity and a much more efficient heat recovery system. The ventilation section has a cross-flow coil and the machine has an annual heat recovery efficiency of 77%. Compared to older air handling units, energy consumption is significantly reduced.
The ventilation section has automatic heat recovery with partial bypass, a service reminder, a weekly clock and built-in humidity and carbon dioxide sensors to improve ventilation as required. MC automatic defrosting keeps efficiency high even in severe frosts and does not increase the building's negative pressure. Vallox Aito Home Heating can also be equipped with a carbon dioxide sensor or an additional switch for e.g. boost or fireplace function. The filters in the ventilation section effectively clean the supply air. The ventilation is controlled by the MyVallox controller or via the home network, home automation or cloud service.
The air heating section has a 6-row liquid circulation radiator, which allows the home to be heated efficiently and yet draught-free with a low circulating air flow. The output of the radiator is controlled by the same controller as the ventilation. The speed of the recirculation fan is controlled by a dedicated four-step controller.
- Annual heat recovery efficiency: 77%
- Self-fired power (SFP): 1.0
- Maximum exhaust air flow: 102 l/s 100 Pa
- Maximum supply air flow: 102 l/s 100 Pa
- Dimensions (LxWxD): 1826 x 590 x 620 mm
- Weight with packaging: 150 kg
- Enclosure class: IP 34
- Electrical connection: 230 V, 50 Hz ≈ 8.1 A (plug)
- External controls: -
- Exhaust fan power: 0.119 kW 0.9 A
- Inlet fan power: 0.119 kW 0.9 A
- Heat recovery cell: cross-coupled
- Heat recovery bypass: Automatic
- Heating: -
- Residual heating: -
Warranty 2 years / Warranty conditions: https://www.vallox.com/maintenance/warranty-conditions/
- Residual Heating: Electric 900 W
- Type Number: 3118
- Filters, Supply Air: F7 and G4
- Filters, Exhaust Air: G4
