The basic idea in Tormek's grinding systems is repeatability. The grinding angle is adjusted with controls, only a small amount of steel is removed during grinding. The method is very fast. In addition, the blades last longer. Tormek uses a uniquely effective aluminum oxide grinding stone. Finishing sanding and polishing is done with a leather disc. A sanding guide can also be used to achieve a precise and sharp result. The universal support, which serves as the basic element of the system, has a thread for fine-tuning the precision settings. The universal support can be installed either in a vertical position for counter-sanding or in a horizontal position for parallel sanding.
- Bottom frame ABS plastic.
- Upper frame zinc.
- Stainless steel main shaft with Ezylock nut.
- Motor 230 V / 50 Hz
- Power 120W
- Rotation speed 120 rpm
- Operating time 30 min/h.
- Grinding stone 200x40 mm aluminum oxide
- Leather disc 145 x 26 mm
- Weight 7.5 kg
- Made in Sweden
- Warranty 7 years
Includes additional parts: SG-200 Grinding stone, SP-650 Stone adjuster, WM-200 Angle interpreter, PA-70 Polishing paste, US-105 General support, HB-10 Manual, Instructions DVD-1.
