Timco short-body silicone caulking gun – for working in confined spaces
Timco’s short-body silicone caulking gun makes it easier to work in locations where the length of a standard caulking gun would otherwise restrict its use. The compact design adds only a small amount to the total length of the cartridge, meaning the dispenser fits even in tight installation spaces.
The operating principle is based on splitting the cartridge casing during dispensing, allowing the dispenser mechanism to advance through the cartridge. This means there is no need for a long, protruding push rod at the rear of the tool. The sturdy aluminium and steel construction minimises flex and provides a stable feel when working.
The 18:1 gear ratio offers a good balance between pressing force and feed speed. The press is suitable for cartridges of up to 310 ml, and its stated clamping force is approximately 2 kN. Its compact dimensions also save space in a toolbox.
If required, the device can also be used as a lightweight glue press to hold pieces in place during gluing.
Technical specifications:- Dimensions: 305 × 220 × 55 mm
- Weight: 440 g
- Material: aluminium and steel
- Gear ratio: 18:1
- Cartridge size: up to 310 ml
- Clamping force: approx. 2 kN
What does the gear ratio indicate?
The gear ratio indicates the extent to which the mechanism amplifies the force of the hand’s squeeze. A higher gear ratio makes it easier to dispense stiff materials, but usually requires more presses of the handle to dispense the same amount of material. The actual clamping force also depends on the user’s hand strength and the design of the clamp.
7:1–10:1
Fast dispensing for runny compounds. Dispensing the same amount of material usually requires fewer presses of the handle, but more hand strength than with a higher gear ratio. Suitable, for example, for acrylic compounds and easily extrudable silicones.
12:1–18:1
A versatile choice for professionals and DIY enthusiasts. Offers a balance between power transmission and feed rate. Suitable for standard silicones as well as many adhesives and sealants.
25:1 or higher
Facilitates the dispensing of particularly stiff and thick compounds. Suitable for demanding construction adhesives and other compounds requiring high compression force, provided the cartridge and compound are compatible with the specific dispenser. Always follow the compound manufacturer’s operating temperature ranges and instructions for use.