Snow accumulating on the roof causes many problems. When the temperature varies between freezing and shelter, the weight of the snow can break structures and cause expensive repairs. Under the layer of snow, a layer of ice forms with protective layers, under which the melting water penetrates through the roof structures, causing water damage. Snow obstacles and roof ladders are hard when the snow mass is big enough. Snow still falling uncontrollably from roofs is a danger to people.
Snow thrower Tarmo has been developed to facilitate the removal of roof snow
Lumenpudottaja Tarmo is a
work tool for removing snow from roofs that was born as a result of Finnish product development. Tarmo is a professional tool, but due to its lightness and ease of use, it is suitable for everyone's hand and use. The product has developed over the years to its current form, when Peltisepänliike Seppo Koskinen Oy has almost always encountered snow problems in connection with roofing projects.
Tarmo's range is 6-7 meters. It removes snow with a blade that can be easily adjusted to an angle suitable with the roof. The foot of the snow cutting trough is designed so that the cutting blade does not hit the roof. The snow that accumulates in the trough falls freely down the long plastic guide – without significant use of force. The aluminum construction is durable, but light. The handle is rigid, so it is easy to move the tool from one place to another. Tarmo works in two directions: it drops snow both when pushed and when pulled. In summary, Tarmo is easy to use and it is fast, so the work efficiency is excellent. Tarmo is suitable for all roof types and it can handle all kinds of snow, including hardened snow. Snow obstacles do not hinder work.
Snow thrower Tarmo is an easy-to-use and safe work tool
Tarmo is easy to assemble and disassemble and it fits into a small space, so transport and storage are effortless. Work safety is good: instead of a shovel, work is basically done either from the ground or from the brush. The current customer base consists of professional users (fire departments, property management companies) as well as building societies and private individuals.
- Handle and cutter made of light 2 mm aluminum
- Weight: 7.6 kg (with 3 2-meter extension tubes)
- Dimensions: h 25 x 37 x 30 cm
- Dimensions up to about 7 meters
- Plastic mat length 3 m ( NOTE! Unlike the picture, the plastic mat is clear )
