Spores of microorganisms are carried in the air, and you cannot avoid them getting into the pool water. Environmental conditions, such as heat, heavy rains and frequent use of the swimming pool, also affect the formation of deposits. KlarPool prevents the formation of slippery algae deposits on the bottom and walls of the pool.
Start dosing: 1 gram of KlarPool/10,000 liters of water.
Preventive dosage: Add 0.5 dl weekly. KlarPool/10,000 liters of water.
When the damage has occurred If algae has formed on the bottom and walls of the pool, the pool water must first be shock disinfected with either Pikachlor (1701) or OxyChock (1784) before using KlarPool.
First, mix KlarPool with water in a clean plastic container. After this, the solution is added along the edge of the pool.
We recommend a larger dosage if you swim a lot in the pool, or if the temperature is high and after a storm.
The recommended pH ranges from 7.0 to 7.4, so that the used water treatment products can be used optimally. If the pH is above 7.4, lower it with pH minus. If the value is below 7.0, increase it with pH-Plus value. PH is easily measured with Swim & Fun Test Strips (1537).
Please note that chlorine consumption may vary depending on the water temperature, how often and for how long you swim in the pool, and the weather. Store the product upright in its original packaging out of the reach of children. Protect from freezing and direct sunlight.
Use biocide products in a safe manner. Biocides should be used with caution. Read the label and instructions for use before using the product.
