Electric heater for small swimming pools (< 1,000 L) and outdoor hot tubs (pools and hot tubs). Recommended as frost protection and additional heat source.
The water in the 1,000-liter pool warms approx. 0.7 degrees per hour when the pool is covered with a thermal blanket. (Measured when the surrounding temperature is +2...–5 degrees.)
The water heater is equipped with an easily adjustable thermostat with a scale of 0–45 °C and a flow switch. The flow switch automatically turns off the water heater when the circulation pump stops.
50 mm lime sleeves in the input and output connections Heat output: 2000 W, 10 A 230 V / 50–60 Hz
- Note:
- This electric heater is a professional device with no plug in the cord. We recommend that the installation be done by a trained electrician.
- A sensor is installed in the water heater that prevents the heater from operating unless the pump is running and circulating water through the heater at a rate of at least 3600 liters per hour.