StormSeal is a water-based seam sealant for sealing leaking seams in tents and other waterproofing equipment. It is fluid, so it absorbs effectively into stitching and pinholes where water often gets through.
On curing, StormSeal forms a clear, flexible, waterproof surface that will not harden or crack in use. A wide brush is supplied with the saturation bottle, making it easy to apply the material evenly over the entire seam area.
Application:
- For seams in tents
- For seams in bivy bags
- For waterproof clothing
- .For other garments where seams no longer hold water
Instructions for use
- Shake the bottle carefully before use. Remove the cap and pour the seam sealer into a suitable container, such as a cup or the lid of the package.
- Use the brush provided to apply directly to the seam stitch or hole. The agent will be absorbed into the threads and needle holes. Allow to dry for approximately 15-25 minutes or until the surface is clear and dry.
- Once dry, StormSeal is transparent, flexible and waterproof.
Note- Let the treated seam dry thoroughly before taking the garment out in the rain.
- Test the product on a small, inconspicuous area first to ensure no discoloration.
- The product is water-based and non-toxic.
- No VOCs.
- Can be washed off with water before drying.
- Keep out of reach of children.
Technical information- Content: 100 ml
- Content: approx. 12 m seam (approx. 2.5 cm wide seam)
- Drying time: about 15-25 minutes
- Material: water-based styrene-acrylic polymer dispersion
- Colour when dry: clear/transparent
