SteyrTek Adapter (spreader bar)
- Thickness: 1 inch = 25.4 mm
- Bolt distribution: 5x108/5x114.3
- Center hole inside 65.1 mm
- Outer diameter of the collar (axle replacement) on the outside 60.1
- Outer diameter 160 mm
- Pack of 1
If you want to ensure the adapter is centered in relation to the car, use an adapter. Choose an adapter where the outer diameter is the inner diameter of this adapter, i.e. 65,1 and the inner diameter is the thickness of the axle of your car.
With this adapter you can fit 5x114,3 rims on a 5x108 car. At the same time you bring the rim of the car 25 mm outwards, i.e. you reduce the ET. As shown in the picture, the bolts and nuts (12 mm x 1,5 mm with rise) to fix the rim to the spacer are included in the delivery. The bolts for fixing the spacer to the car hub are not included in the delivery. Use car bolts. For a thin spacer, you may need to lower the end of the bolt or purchase lower heel bolts. Top grade aluminum from SteyrTek.
For racing only.
