SteyrTek Adapter (circulation piece)
Thickness: 1 inch = 25.4 mm
Bolt distribution: 5x101.6/5x114.3
Center hole inside 57.1 mm
Outer diameter 160 mm
In the package 1 kp
lIf you want to ensure that the adapter is centered in relation to the car, use an adapter. In select the adapter, the outer diameter is the inner diameter of this adapter, i.e. 57.1, and the male diameter is the thickness of the car axle.
With this you bring the rim 25 mm outwards in a car with a 5x101.6 split, i.e. you reduce the ET. At the same time, the division changes from 5x101.6 -> 5x114.3.
As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the hub of the car are not included in the shipment. Use car bolts. In a thin spacer, you may have to lower the head of the bolt or get bolts with a lower base. Top class aluminum from SteyrTek. For racing use only.
