- SteyrTek Adapter (circulation piece)
- Thickness: 2 inches = 51 mm
- Bolt distribution: 6x139.7/6x139.7
- Center hole: 110 mm
- Outer diameter 176 mm
- 1 pc in the package
If you want to ensure that the adapter is centered in relation to the car, use an adapter. Select the adapter, the outer diameter is the inner diameter of this adapter, i.e. 110, and the inner diameter is the thickness of the car shaft.
With this you bring the rim 50.8 mm outwards in a car with 6x139.7 split, i.e. you reduce the ET. The division remains unchanged. As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. Top class aluminum from SteyrTek.
For racing or show use only. Not allowed for road traffic.
