- SteyrTek Adapter (circulation piece)
- Thickness: 2 inches = 51 mm
- Bolt distribution: 5x112/5x112
- Center hole: 66.6 mm
- Outer diameter 150 mm
- 1 pc in the package
If you want to ensure that the adapter is centered in relation to the car, use an adapter. Choose an adapter where the outer diameter is the inner diameter of this adapter, i.e. 66.6, and the inner diameter is the thickness of the car axle.
With this, you bring the rim 50.8 mm outwards in a 5x112 car, i.e. reduce the ET. The distribution remains unchanged. As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the hub of the car are not included in the shipment. Use car bolts. Top class aluminum from SteyrTek.
For racing or show use only. Not allowed for road traffic.
