- SteyrTek Adapter (circulation piece)
- Thickness: 2 inch = 51 mm
- Bolt pitch: 5x4.5"= 5x114.3mm/5x114.3mm
- 5 holes with a 4.5 inch pitch, which turns it into a 5 stud bolt with the same pitch, i.e. it doesn't change the pitch, but brings the rim out 2 inches, i.e. 50.8 mm
- Center hole: 71.5 mm
- Outer diameter 150 mm
- 1 pc in the package
If you want to ensure that the adapter is centered in relation to the car, use the adapter. Choose an adapter where the outer diameter is the inner diameter of this adapter, i.e. 71.5, and the inner diameter is the thickness of the car axle.
In a car with a 5x4.5" split, you bring the rim 50.8 mm outwards, i.e. you reduce the ET. The split remains unchanged. As shown in the picture, the stud bolts and nuts (12x1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the hub of the car are not included in the delivery. Use the car bolts. Top class aluminum from SteyrTek.
For racing or show use only. Not allowed for road traffic.
